Technical Endowment

S.C. Electroutil Aliser S.R.L has in its endowment a series of work tools,machinery and special gadgets,with wich it enstablishes daily activity in quality con ditions and prescriptions equal t othe requierments engaged by the technical standards and normatives of quality,internal and international.

The most representative are as follows:

-Metal sheet Cutting scissors:

FDB 6.3000 FDB 13.6000*

1) Cutting thickness mm 4-6 13
2) Metal sheet lenght mm 3000 6000
3) Instaled Power kw 11,37 37
4) Dimensions
L x l x h mm 3680x2100x1515 6600x2700x2400
5) Weight kg 7000 30.000

- bending press
PIT 63x3050 PIT x6000*

1) Nominal Power kN 630
2) Work lenght mm 3050
3) Power kW 5,5
4) Work presure bar 240
5) Dimensions
L x l x h mm 3175x1400x2000
6) Weight kg 6200

-Combined metal sheet scissors-pf-14

1) Metal sheet thickness mm max.14
Cut lenght mm 180
2) Round profile(diameter) mm 45
Square profile(side) mm 40
4)Thickness/diameter mm 30x16
perforation(poanson)
5)Instaled power kW 5,5
6)Dimensions
L x l x h mm 1825x825x2050
7)Weight kg 2950

- Numeric Command center -Boshchert-Gmbh

1) Pressing power kN 280
2) Installed Power kW 4
3)Maximum cutting diameter mm 105( tb. 1mm)
40( tb. 6mm)
4) Nr. of runs/ min - 180
5) Dimensions
L x l x h mm
6) Weight

-Electrostatic field painting line -Larius Electrostatic(CH100-TRIBO)

1) Power suply V c.a. 110-220
2)Installed power kW 60
3) Frecquency Hz 50
4) Dust amount kg./h 3 -20
5) Polarity - negativă
6) Dimensions
L x l x h mm 490 x690x1100
7) Weight kg 44

-Welding sources

Welding in a protective gas enviroment ,aciv Corgon 18-welding MAG and argon enviroment,with fuzible electrod-MIG welding for relatively thin metal sheets(6mm) can be acomplished usding the Miller XMT 304 sources.